SS3001

Fragment Analysis with Run Report

• Customers to perform PCR reactions and clean-up.
• 1st BASE to perform electrophoresis, data extraction & data analysis with the provided fragment sizes.
• Sample submitted in tube/ strips.

3-4 working days. Discount available for > 50 loads.

SS3002

Fragment Analysis with Run Report, 96-well format

• Service similar to above (SS3001), except samples submitted in plates
• 95 samples/ plate; leave H12 empty for control.

3-4 working days. Discount available for > 50 plates.

SS3003

Fragment Analysis without Run Report

• Customers to perform PCR reactions, clean-up, and data analysis.
• 1st BASE to perform electrophoresis and data extraction.
• Sample submitted in tube/ strips.

2-3 working days. Discount available for > 50 loads.

SS3004

Fragment Analysis without Run Report, 96-well format

• Service similar to above (SS3003), except samples submitted in plates
• 95 samples/ plate; leave H12 empty for control.

2-3 working days. Discount available for > 50 plates.

SS3005

Fragment Analysis Re-Load - Single Well/ Tube

• Where spectral optimization is not included, each request of reload from SS3001, SS3004, and SS3012 to SS3019 will be chargeable at this rate.

2 working days

SS3006

FA Spectral Optimization - Charge per first labeled primer/ locus.

• Before loading, 3 types of Dilution Factor (DF) will be tested on the labeled sample(s) to get the optimum DF for data analysis.
• To opt out of this service, please provide DF for each labeled primer.

2 working days

SS3007

FA Spectral Optimization - Charge per each add-on labeled primer.

• Before loading, 3 types of Dilution Factor (DF) will be tested on labeled sample(s) to get the optimum DF for data analysis.
• To opt out of this service, please provide DF for each labeled primer.

2 working days

SS3008

FA Spectral Optimization - Ready Multiplexed Sample.

• Before loading, 3 types of Dilution Factor (DF) will be tested on 3 multiplexed samples to get the optimum DF for data analysis.
• To opt out of this service, please provide DF for each labeled primer.

2 working days

SS3010

Fragment Analysis Sample Quantification - By Agarose Gel

1 working day

SS3011

Fragment Analysis Sample Quantification - By Spectrophotometer Reading

1 working day

SS3012

Fragment Analysis with Run Report, without spectral optimization

• Customer to dilute samples to the appropriate concentration prior to submission.
• 1st BASE takes 2uL of the diluted DNA for electrophoresis.
• Sample submitted in tube/ strip.

1 to 2 working days, designed to meet the needs of experienced users. Dilution is typically between 1uL:3uL – 1uL:90uL (PCR template:dH20)

SS3013

Fragment Analysis with Run Report, without spectral optimization in 96-well format

• Service similar to above (SS3012), except samples submitted in plates
• 95 samples/ plate; leave H12 empty for control.

1 to 2 working days, designed to meet the needs of experienced users. Dilution is typically between 1uL:3uL – 1uL:90uL (PCR template:dH20)

SS3014

Fragment Analysis without Run Report, without spectral optimization

• Customer to dilute samples to the appropriate concentration prior to submission.
• 1st BASE takes 2uL of the diluted DNA for electrophoresis.
• Sample submitted in tube/ strips.

1 to 2 working days, designed to meet the needs of experienced users. Dilution is typically between 1uL:3uL – 1uL:90uL (PCR template:dH20)

SS3015

Fragment Analysis without Run Report, without spectral optimization in 96-well format

• Service similar to above (SS3014), except samples submitted in plates
• 95 samples/ plate; leave H12 empty for control.

1 to 2 working days, designed to meet the needs of experienced users. Dilution is typically between 1uL:3uL – 1uL:90uL (PCR template:dH20)

SS3016

FA Ready-to-load with Run Report

• Customers to mix appropriate amounts of PCR template, size standard, and Hi-Di Formamide prior to submission.
• 1st BASE loads the mixture to Genetic Analyzer directly.
• Sample submitted in tube/ strip.

1 to 2 working days, designed to meet the needs of experienced users. We only accept Applied Biosystems (ABI) ROX-500 or LIZ-500 size standards.

SS3017

FA Ready-to-load in 96-well format with Run Report

• Service similar to above (SS3016), except samples submitted in plates
• 95 samples/ plate; leave H12 empty for control.

1 to 2 working days, designed to meet the needs of experienced users. We only accept Applied Biosystems (ABI) ROX-500 or LIZ-500 size standards.

SS3018

FA Ready-to-load without Run Report

• Customers to mix appropriate amounts of PCR template, size standard, and Hi-Di Formamide prior to submission.
• 1st BASE loads the mixture to Genetic Analyzer directly.
• Sample submitted in tube/ strips.

1 to 2 working days, designed to meet the needs of experienced users. We only accept Applied Biosystems (ABI) ROX-500 or LIZ-500 size standards.

SS3019

FA Ready-to-load without Run Report in 96-well format

• Service similar to above (SS3018), except samples submitted in plates
• 95 samples/ plate; leave H12 empty for control.

1 to 2 working days, designed to meet the needs of experienced users. We only accept Applied Biosystems (ABI) ROX-500 or LIZ-500 size standards.